How to find and solve common faults in the air duct production line duct making line
The production process of the air duct is completed continuously and independently by the air duct production line. The air duct production line is a precise mechanical equipment with simple operation and high efficiency. The quality and stability of the qualified air duct production line are very high, but as the use time increases, improper equipment maintenance, worker error and other factors will cause some problems in the air duct production line, let’s explain the common failures and solutions of the air duct production line. Method.
- The touch screen displays the hydraulic overload alarm and flashes
Solution: Check whether the pressure of the hydraulic station system of the air duct production line is too high, whether the oil pump is damaged and the thermal relay is tripped, disassemble the cover of the electrical box, and manually reset the thermal relay.
- The touch screen displays the emergency stop and servo alarm of the system and flashes
Solution: Loosen the emergency stop button next to the touch screen of the air duct production line.
- The unwinding machine does not stop or does not discharge the material
Solution: Check whether the photoelectric switch of the material picking rack of the air duct production line is damaged or the connection line is disconnected, and the time relay in the uncoiling electromechanical box is damaged. Check and replace.
- The air duct production line punches a small mouth without lifting the knife
Solution: The solenoid valve may be blocked by debris, and the machine can be cleaned up.
- The punching die and shearing knife of the air duct production line cannot be moved
Solution: Check whether the electrical circuit or equipment of the machine is damaged, and replace and repair it in time.
- After the air duct production line starts production, the size of the sheet is unstable or the sheet only keeps moving
Solution: Check the encoder and signal line to see if there is deviation or damage, and repair it in time.
- The produced product has cracks
Solution: Check whether the raw materials are qualified and whether the operators are negligent.
The above are the common failures and solutions of the air duct production line. Therefore, it is recommended that everyone pays attention to the proper operation when using the air duct production line and regularly maintains the equipment. If there is a serious problem, it is recommended to contact the air duct production line manufacturer as soon as possible and seek help , Quickly resume production to ensure the smooth progress of the project.
